2 Pin Cleats
£3.57 – £7.30
Needed to attach a Long Concrete Gravel Board to Morticed Concrete Posts. Nut, bolt and washer to suit, one would be needed for each end of the gravel board.
Note: All of our products are made to the metric measurements given. The imperial is just for reference. All sizes given are approximate.
We offer 3 different 2 Pin Cleats for a range of different uses!
Our 150mm (6″) 2 Pin Cleat is the most popular type. It allows for a flush finish with the top of the concrete posts as long as you do not use a Cant Rail and Capping at the top of your fence.
Our 150mm (6″) for Capping 2 Pin Cleat is the one you need if you are using Capping at the top of your fence. It drops the gravel board, and therefore the whole fence, to allow for the capping to sit flush with the top of the posts.
Our 300mm (12″) 2 Pin Cleat is the one used for 2 purposes!
- If you want to use a double gravelboard on the 2.7m Long for 1.65m Feather Edge or the 2.7m Long for 1.8m Feather Edge Concrete Morticed Posts.
- They can also be used to drop the gravel board to allow for use of 1.95m Feather Edge with the 2.7m Long for 1.8m Feather Edge Concrete Morticed Posts.
Related products…
