Custom-made

As we manufacture our own Panels, Trellis and Gates, it means we are quite flexible with our sizes, which is good news for our customers!

A common issue when installing fencing is that there will usually be an odd-sized bit at the end of the fence. This is sometimes solved by cutting down a full-sized fence panel however this can be a messy, hard work and create a lot of wastage. The simplest and best solution is to ask us to make a custom sized panel for you. Just contact us with the size and type of panel you are after, and we will give you a quote. It is worth noting that lapped panels can only be made smaller than 1.83m x 1.83m (6’ x 6’) as the materials come pre-cut to us at those lengths. Whereas our Closeboarded Panels, Green Closeboarded Panels and Tongue & Groove Panels can be made both bigger and smaller.

A similar problem can occur with trellis when installing it on top of a fence, on top of a wall or between brick pillars. Like fencing panels, trellis can be cut down to size however this has the same draw backs as described above. As we manufacture our trellis, we are able to make sections to custom sizes both bigger and small than the sizes you see on our website. If you need some custom sized trellis then please feel free to contact us for a quote. It is worth noting that the exception to this is our Brown Heavy Duty Trellis, Brown Small Square Trellis and our Dome and Bow Top Trellis which can only be made smaller than 1.83m x 1.83m (6’ x 6’) as the materials come pre-cut to us at those lengths.

Similarly, not every opening for a gate is made the same. All of our wooden gates are made in-house by our expert team and so if you need a custom sized gate just contact us with the measurements and type of gate and we quote you for it.